技术中心、测试实验室-测试、试验、培训全面，高素质，胜任。
POLYTEST•生产线
为了更好地支持科林的客户，在我们的技术中心，有不同的生产线和测试设备用于试验或培训。
我们经验丰富的工程师和塑料技术员团队有超过30年的炬峰经验。
服务范围
- 对客户的培训——例如他们或我们的机器的新技术
- 客户新材料或配方的可加工性测试
- 测试新的colin开发
- 新机器的验证
- 为选择或设计客户线而进行的预测试
- 员工内部培训
- 为客户提供现场、网上或电话的程序性问题支持
为客户提供现场、网上或电话的程序性问题支持:
吹塑薄膜挤出至600毫米的平放宽度
BL 600 P
具有不同轴向和径向螺旋芯棒分配器的各种模具
特殊模具(条形模具、反向旋转模具)
窄、中和宽软管的冷却环
吹塑薄膜淬火生产线
高温塑料加工(加热冷却空气)
COLLIN Blown Film Line P Professional
Cast film for a width of up to 600 mm
CL 600 P
3 rolls, smoothing, casting and cooling roll
Diverse slot dies with different widths and options
Edge cutting, surface treatment (corona, discharge)
Unwinding station for lamination
COLLIN Calender
Mono-axial stretching of films (MDO)
Pilot Line MDO II 600
Roll to Roll process or
inline in film lines
Teach Line MDO
Biaxial stretching in the stretching frame (TDO)
Extrusion of hoses, tubes or filaments
Diverse tube and hose dies for different products (also coextrusion)
Water baths (passively/actively cooled)
Belt take-off with integrated diameter determination
Filament winder for coils
Contact us now!
Camera inspection
Stand-alone design with encapsulated test housing (COFICOS)
Use in blown or flat film line
Coextrusion up to 9 layers (flat film) resp. 7 layers (blown film)
5-layer Medical Line
Extruder with a diameter of 12 mm to 45 mm
Partially with medical or high-temperature configuration and high-speed motor
Roll Mill
Measuring roll mill
Compounder with a screw diameter of 12 mm and 25 mm
Several gravimetric dosings
Melt pumps for direct extrusion
Strand pelletizers as well as underwater pelletizers
COLLIN Compounder
Melt Blown Fleece production with a width of up to 700 mm
Different dies with several hole diameters and air geometries
Collector drum with a width of 800 mm and a diameter of 600 mm
Melt Blown Line for Fleece
>>>
Moreover, we also offer material tests as a service:
Viscosity measurement by WROR
Film characterization by COFICOS or multi-inspection
MFR/MVR measurement
Microscopic tests
Film tension tests
Humidity Measurement
Simulation methods
Furthermore, we can support our customers with simulation methods (flow simulation) during the product development.
